How to clear cloudy aquarium water
Cloudy water is microscopic particles. Identify the type, test ammonia, add fine filtration and a clarifier such as Seachem Clarity, Fritz Crystal Clear or Dr. Tim's Clear-Up, then fix the cause.
Short answer: Cloudy aquarium water is microscopic particles floating in the water. Work out which type you have (white bacterial haze, green algae, mineral precipitate or dust), test ammonia, then add fine mechanical filtration such as filter floss or a polishing pad and dose a clarifier like Seachem Clarity, Fritz Crystal Clear or Dr. Tim's Clear-Up to clump the particles so the filter can catch them. Then fix the cause so it doesn't come back. Every dose below comes from the maker's own directions.
What makes aquarium water cloudy?
Seachem's cloudy-water guide says there is no single substance called "clouding": it is always microscopic particles, and there are four main types.
| What you see | Likely type (per Seachem) | When it usually shows up |
|---|---|---|
| White, gray or yellow haze | Free-floating bacteria | New tanks or after a major change, when organic waste builds up or spikes |
| Green water | Free-floating algae | Tanks with high light, phosphate, nitrate, or all three |
| Any color, right after dosing | Precipitation | Just after a supplement or buffer is added; most common in reef tanks |
| Any color, right after adding something | Dust | After adding filter media, decorations or substrate; usually settles in a few hours |
If you see precipitation in a reef tank, Seachem says to test your water and make sure the major parameters are in their proper range. Our guides on alkalinity, calcium and magnesium cover those.
Step 1: Test ammonia first
Bacterial haze is common in new tanks, and new tanks are also the ones that are still cycling. Fritz's water-quality checklist says to test ammonia and nitrite daily during the cycling period, with a target of 0 ppm. A liquid kit such as the Seachem MultiTest: Ammonia tells you whether the cloudiness comes with a water-quality problem. If ammonia is above zero, follow how to lower ammonia in a fish tank before you worry about how the water looks.
Step 2: Add fine mechanical filtration
Seachem says that whatever type of clouding you have, you need fine filter media like filter floss to pull the particles out. Pack it into your filter so the water is forced to flow through it. Seachem's Clarity FAQ adds that sponge filters are typically not fine enough on their own.
- Seachem Tidal filter owners: the Seachem Tidal Polishing Pad is a fine polishing pad made for the Tidal 35, 55, 75 and 110.
- Other filters: fit filter floss or a fine pad in the last stage the water passes through. See choosing filter media and how to set up a hang-on-back filter.
Once the floss is saturated and the water is clear, Seachem says to remove it and either rinse it thoroughly or replace it, because clouding particles can clog media enough to block flow.
Step 3: Use a clarifier
A clarifier (flocculant) makes tiny particles stick together into clumps big enough for your filter to catch. Here is how the three clarifiers we stock compare, using each maker's own directions.
| Clarifier | How it works (per maker) | Maker's dose | Repeat |
|---|---|---|---|
| Seachem Clarity | Polymeric flocculant plus precipitating agents in one bottle; for all types of clouding; reef and plant safe | 5 mL (1 capful) per 20 US gallons (80 L) | Every 24 hours as needed |
| Fritz Crystal Clear | Flocculating clarifier; phosphate-free; won't alter pH or affect biological filtration; safe for reef and planted tanks | 5 mL (1 tsp) per 10 US gallons (38 L) | As needed, at least 6 hours between doses |
| Dr. Tim's Clear-Up Freshwater / Clear-Up Reef | Beneficial bacteria that "floc" small particles; made for cloudy white water; no alum or polyacrylamide | 5 mL per 10 gallons; shake well | Water may take up to 24 hours to clear in extreme cases |
Tips from the makers
- Clarity: Seachem says the water may get cloudier right after dosing. That is normal and means the clumps are forming; rapid clearing follows in 1 to 2 hours. In soft or lightly buffered water, Seachem suggests starting at 1/4 to 1/2 dose and testing. Clean the floss or cartridge after the tank clears.
- Crystal Clear: add it directly to the aquarium. Fritz says that if the water doesn't clear quickly, or the haze comes back soon after, you may have a bacterial bloom; reduce feeding and do a partial water change. A bottle covers a lot of water: Fritz rates the 8 oz for up to 480 gallons and the 16 oz for up to 960 gallons.
- Clear-Up: Dr. Tim's says to temporarily turn the filter off, add Clear-Up over the whole water surface, wait 10 to 15 minutes for the flocs to form, then turn the filter back on. Dr. Tim's rates the 4 oz bottle for 240 gallons and the 8 oz for 480 gallons.
Step 4: Stop it from coming back
Seachem says bacterial and algae clouding tend to return if conditions stay right for them. Its prevention advice:
- Reduce organic waste. Media like Seachem Purigen help lower the organic waste that feeds free-floating bacteria. Seachem rates one 250 mL bottle for up to 250 gallons for up to six months, used in a fine mesh bag where the most water flows. More in how to use Seachem Purigen. Chemi-Pure Original is another option: a ready-to-use bag of activated carbon and ion-exchange resins that removes organics and discoloration (5 oz bag for 0 to 25 gallons, 10 oz for 0 to 50 gallons).
- Support your beneficial bacteria. Avoid unnecessary medication and overfeeding, and give the filter plenty of bio-media. New tank? See cycling a new tank.
- Don't over-clean. Seachem lists overenthusiastic filter cleaning, gravel siphoning and massive water changes among the most common causes of clouding. Keep maintenance regular and moderate; see how to do an aquarium water change.
- Green water: Seachem links algae clouding to strong light plus high phosphate and nitrate. Cut back on what's feeding it, and read how to use an aquarium UV clarifier. Reef keepers can also see how to lower phosphate and how to lower nitrate. Seachem notes planted tanks need phosphate, so it doesn't recommend phosphate removers there.
FAQ
Why did my water get cloudier after I added a clarifier?
Seachem says this is normal with Clarity: the flocculant is clumping particles that were too small to see, so they become visible before the filter removes them. If it never clears, Seachem says your mechanical filtration probably isn't fine enough. Add filter floss and expect to change it a couple of times.
Will a clarifier fix a bacterial bloom?
Seachem says Clarity clears all types of clouding, including bacterial and algae blooms. Fritz notes a bacterial bloom can return faster than Crystal Clear and the filter can remove it, so cut feeding and do a partial water change to remove the excess nutrients. Either way, fixing the cause is what keeps it clear.
Are clarifiers safe for reef tanks and plants?
Seachem says Clarity is reef and plant safe when used as directed. Fritz says Crystal Clear is safe for reef and planted systems. Dr. Tim's makes a separate Clear-Up Reef for saltwater tanks.
My new tank went cloudy right after I filled it. What do I do?
If it appeared right after adding substrate, media or decorations, Seachem says it's usually dust and will often settle in a few hours. Fine filtration and a clarifier speed it up.
Shop cloudy-water fixes
Browse clarifiers, conditioners and bacteria in Water Care, filter pads and media in Filtration, and kits in Test Kits. For the full testing routine, see which test kits you need.