Purigen vs carbon: which filter media should you use?
Seachem Purigen vs activated carbon: what each removes, how long they last, how to run them, and why many tanks use both.
Short answer: Seachem Purigen and activated carbon both pull dissolved organic waste out of aquarium water, so either one helps keep water clear and clean. The big differences: Purigen is a synthetic polymer you can regenerate with bleach and reuse, while carbon is replaced when it's used up. You don't have to pick one. Seachem says Purigen works with carbon, and running carbon too extends Purigen's useful life.
Purigen vs carbon at a glance
| Seachem Purigen | Activated carbon (e.g. Seachem Matrix Carbon) | |
|---|---|---|
| What it is | Macro-porous synthetic polymer beads | Activated carbon. Matrix Carbon is a spherical bead that won't pack down |
| Main job | Removes soluble and insoluble organic impurities, polishes water clarity | Removes dissolved organics, discoloration and odors |
| Treats (Seachem) | 250 mL treats up to 250 US gal for up to 6 months | Matrix Carbon: 250 mL treats 100 US gal for several months |
| When it's spent | Beads turn dark brown or black | Replace on a schedule |
| Reusable? | Yes, regenerate with bleach | No, replace it |
| Bag | Fine mesh bag, 180 micron or less | Filter media bag |
| Fresh or salt | Both | Both |
What Purigen does
Seachem describes Purigen as a synthetic adsorbent that isn't a mix of ion exchangers or carbon. It controls ammonia, nitrite and nitrate by removing the nitrogenous organic waste that would otherwise break down into them, has minimal impact on trace elements, and polishes water clarity. One point to know: Seachem says Purigen won't directly remove nitrate that is already in the water. If your nitrate is high, do a water change and work on export. Our how to use Seachem Purigen guide covers setup step by step.
What activated carbon does
Carbon has been a filter staple for decades. It traps dissolved organics in tiny pores, which clears yellow tint and odors. Hobbyists also run fresh carbon after a medication treatment to pull leftover medicine out of the water, and some treatments call for it on the label. For example, Salifert Flatworm eXit directions call for fresh carbon. Carbon choices we carry:
- Seachem Matrix Carbon: spherical bead, very low ash and minimal effect on pH per Seachem. 100, 250 and 500 mL.
- Kolar Labs Granular Activated Carbon: 160 g, 320 g, 3 lb and 10.5 lb.
- Simplicity Ultra Carbon
- Chemi-Pure Elite: a pre-bagged blend of activated carbon and ion-exchange resins, sized by tank volume (from 0–10 up to 175–200 gallons).
Which one should you use?
- You want the clearest water with little ongoing cost: Purigen, since you regenerate it instead of throwing it away.
- You just finished a medication or need fast cleanup: fresh activated carbon.
- You want a no-fuss bag you drop in and swap every few months: Chemi-Pure Elite. Chemi-Pure says to replace it about every 2–4 months depending on bioload.
- You have a reef or a heavily stocked tank: many reefers run both. Seachem says carbon with Purigen extends Purigen's life.
How to run them
Purigen (Seachem's directions)
- Rinse it before use and put it in a fine mesh bag, 180 micron or less.
- Place it where water flows through it: a canister filter, media chamber, box filter or a high-flow area of a sump.
- Use 250 mL for up to 250 US gallons. It lasts up to six months.
- When the beads turn dark brown or black, regenerate it. Seachem's method: soak 24 hours in a 1:1 mix of plain unscented household bleach and water in a non-metal container, rinse well, then soak 8 hours in water with a dechlorinator such as Seachem Prime (Seachem uses 4 tablespoons per cup). Rinse again before reuse.
Matrix Carbon (Seachem's directions)
- Rinse it and put it in a filter bag such as the Seachem Zip Bag.
- Place it where water flows through it, the same as Purigen.
- Use 250 mL per 100 US gallons. It lasts several months.
For either one, put chemical media after your mechanical filtration (sponges, floss or a filter sock) so it isn't clogged by debris. In a sump, a media reactor gives the most even contact. See how to use a media reactor and choosing filter media.
What you need
| Setup | Pick |
|---|---|
| Long-term water polishing | Seachem Purigen in a fine mesh bag |
| Low-dust carbon for a canister or sump | Seachem Matrix Carbon + Zip Bag |
| Carbon in bulk for a reactor | Kolar Labs Granular Activated Carbon or Simplicity Ultra Carbon |
| Drop-in, pre-bagged | Chemi-Pure Elite sized to your tank |
FAQ
Can I use Purigen and carbon together?
Yes. Seachem says they are compatible and carbon extends Purigen's useful life.
Does Purigen remove nitrate?
Not directly. It removes organic waste before bacteria turn it into ammonia, nitrite and nitrate, which can lower nitrate over time. Existing nitrate still needs water changes or other export.
Can I use Purigen during medication?
Check the medication's label. Many treatment directions say whether to remove chemical media such as carbon or Purigen while you treat.