How to lower nitrate in a reef tank
Why nitrate builds up in a reef tank and how to lower it safely: source control, export, water changes, biopellets, carbon sources and anaerobic media.
Short answer: to lower nitrate in a reef tank, cut it off at the source first: feed less, keep the sand and filters clean, and run a protein skimmer and organic-removing media such as Purigen. Then dilute what's already there with water changes. If nitrate still stays high, add a biological export method like biopellets, a liquid carbon source, or anaerobic media. Test before and after every change so you lower it slowly instead of crashing it.
Why nitrate builds up
Nitrate is the end product of the nitrogen cycle. Fish waste, uneaten food and other organic matter break down into ammonia, then nitrite, then nitrate. Your biological filter doesn't remove nitrate; it just keeps making it. So nitrate rises until something takes it out of the water. Seachem's own nitrate guide points to the same root causes: overstocking, overfeeding, and waste trapped in the substrate.
Nitrate reduction methods compared
| Method | How it works | Effort | What we carry |
|---|---|---|---|
| Feed less, clean more | Less waste breaking down into nitrate | Habit change | — |
| Water changes | Dilutes nitrate already in the tank | Ongoing | Water care |
| Organic-removing media | Removes organics before they become nitrate | Low | Purigen, purfiltrum |
| Protein skimmer | Pulls organics out of the water | Equipment + cleaning | See our skimmer guide |
| Biopellets | Feeds bacteria that consume nitrate and phosphate | Reactor + skimmer | NPX Bioplastics, Aquavitro Biogen |
| Liquid carbon source | Same idea as biopellets, dosed as a liquid | Careful dosing + skimmer | Nyos Nitrate Minus |
| Anaerobic media | Hosts bacteria that remove nitrate in low-flow areas | Low | Seachem De*Nitrate |
Step 1: Test and track
Get a reliable number before changing anything, and keep testing as you go. A sudden big drop can stress corals as much as high nitrate. Good reef nitrate kits:
- Salifert Nitrate Test Kit
- Nyos Nitrate Test Kit
- Tropic Marin Pro Nitrite & Nitrate Test Kit
- Seachem MultiTest: Nitrite & Nitrate
More kits are in our test kits collection, and our water testing guide covers what to test and how often.
Step 2: Reduce the source
- Feed less. Feed only what your fish eat and remove leftovers. Seachem notes that food piling up on the bottom only adds to nitrate.
- Don't overstock. More fish in less water means more nitrate.
- Clean the substrate. Seachem suggests siphoning about one third of the substrate at each weekly water change, which removes trapped waste without disturbing all your bacteria at once.
- Keep mechanical filtration clean. Filter socks, floss and sponges hold waste that keeps breaking down until you change or rinse them.
Step 3: Export organics
A protein skimmer removes organic waste before it breaks down, and it's also what removes the extra bacteria grown by biopellets and carbon dosing. Seachem also recommends waste-absorbing media like Purigen and purfiltrum, which remove organic molecules before they can become nitrate. Not sure whether to run carbon as well? See Purigen vs carbon.
Step 4: Water changes
Water changes dilute nitrate that's already in the tank, as long as your new saltwater is made with nitrate-free water. Seachem suggests keeping each change to no more than 30% of the tank to avoid stressing fish and corals. If nitrate is very high, several smaller changes are gentler than one huge one. Our water change guide walks through it.
Step 5: Add biological nitrate removal
When the basics aren't enough, these feed or house bacteria that use up nitrate:
- Two Little Fishies NPX Bioplastics: biodegradable polymer pellets for a fluidized media reactor. Bacteria that grow on them consume nitrate and phosphate, and a protein skimmer removes the extra bacteria. 200 mL and 400 mL.
- Seachem Aquavitro Biogen: a carbon-based PHA biopolymer for a fluidized bed reactor that feeds nitrate- and phosphate-consuming bacteria.
- Nyos Nitrate Minus: a liquid carbon source that feeds heterotrophic bacteria so nitrate and phosphate can be removed by your skimmer. 250 mL and 1000 mL. Dose exactly as the label says.
- Seachem De*Nitrate: porous media with a pore size suited to anaerobic bacteria. Place it in a mesh bag in a low-flow area of the filter (about 50 gph or less).
Seachem points out that biopellets and carbon dosing need careful dosing and the right equipment: a reactor for pellets, and a skimmer for both. Start slowly and keep testing. Since these methods also lower phosphate, test both. See how to lower phosphate in a reef tank and how to use a media reactor.
FAQ
Do water changes lower nitrate?
Yes, by dilution, if your replacement water has no nitrate. They work best alongside source control and export, because the tank keeps making nitrate between changes.
Does Purigen remove nitrate?
Not directly. Seachem says it removes organic waste before it becomes nitrate, so nitrate drops over time.
Should I get nitrate to zero?
Lower it gradually rather than chasing zero overnight, and watch how your corals respond. Biopellets and carbon dosing can overshoot if you push them too hard, so test regularly.
If you go the biopellet route, Kolar Labs Bio Pellets are biodegradable polymer pellets that reduce nitrate and phosphate when run in a fluidized reactor (300 g, 600 g or 25 lb).