How to lower nitrates in a freshwater aquarium
Water changes first, then less waste, Purigen and denitrifying bio media like Seachem De*Nitrate and Matrix: how to lower nitrate in a freshwater tank and keep it down.
Short answer: To lower nitrates in a freshwater aquarium, do a partial water change with low-nitrate water first, then cut what makes nitrate: overfeeding, overstocking and waste trapped in the gravel. Test before and after with a kit like the Seachem MultiTest: Nitrite & Nitrate or the Fritz Nitrate Test Kit. To keep nitrate down between water changes, give denitrifying bacteria a home with porous media such as Seachem De*Nitrate, and use Seachem Purigen to remove organic waste before it turns into nitrate.
Where nitrate comes from
Nitrate is the end of the nitrogen cycle. Seachem explains that any organic waste that rots in the tank is broken down by beneficial bacteria into ammonia, then nitrite, and finally nitrate. Every tank with fish in it makes nitrate, so the goal is not zero. The goal is to remove it at least as fast as the tank produces it.
Nitrate is far less toxic than ammonia or nitrite, but high levels are harmful to fish and can lead to algae and green water. Seachem's general rule is that nitrate should not be allowed to build up far above about 40 mg/L in any system, and that some fish are much more sensitive than others, so research your species. Planted tanks are different: Seachem says most planted-tank keepers keep nitrate around 10–20 mg/L, because plants use it as food.
Step 1: Test your tank (and your tap water)
Test first so you know how high nitrate is and whether your changes are working. The Seachem MultiTest: Nitrite & Nitrate tests both nitrite and nitrate (about 75 tests) and includes reference solutions so you can check the kit. The Fritz Nitrate Test Kit is a liquid reagent kit with a color chart (about 90 tests). Both work in freshwater and saltwater.
Test your tap water too. Water changes only lower nitrate if the new water has less nitrate than the tank. If your source water already contains nitrate, The Spruce Pets suggests blending it with RO or deionized water, remembering that pure RO/DI water has no minerals and may need remineralizing.
Step 2: Do partial water changes
Water changes are the simplest and most common way to lower nitrate. Seachem shows the math: if nitrate is 100 mg/L and you change 30% of the water, it drops to 70 mg/L. Another 30% brings it to 49 mg/L, then 34.3 mg/L. You can't reach zero with water changes alone, and Seachem warns that a 100% change is never recommended because it is extremely stressful to fish and can crash your beneficial bacteria.
Seachem also cautions that rapid shifts in water parameters can stress fish more than they help, even when the change is in a good direction. If nitrate is very high, bring it down over several partial changes rather than all at once.
Treat the new water with a conditioner. Seachem Prime removes chlorine and chloramine and, per Seachem, binds ammonia, nitrite and nitrate in a non-toxic form for up to 48 hours. Prime does not remove nitrate from the tank, so it is a safety net, not a fix. For a full walkthrough, see how to do an aquarium water change and how to use Seachem Prime.
Step 3: Cut nitrate at the source
Seachem lists these ways to make less nitrate in the first place:
- Don't overstock. A tank that is too small for its fish has less water to dilute the waste.
- Don't overfeed. Food that piles up on the bottom rots into nitrate.
- Clean the substrate. Seachem recommends siphoning about 1/3 of the gravel or sand with each weekly water change. That removes trapped waste without the ammonia and nitrite spikes that can follow over-enthusiastic gravel cleaning.
- Use a waste-absorbing media. Seachem Purigen removes nitrogenous organic waste before bacteria can turn it into ammonia, nitrite or nitrate. Seachem says one 250 mL bottle treats up to 250 US gallons for up to six months, and the beads darken to brown or black when they are exhausted. It lowers nitrate over time but won't directly remove nitrate already in the water. See how to use Seachem Purigen.
Step 4: Add denitrifying bio media
The bacteria in a normal filter make nitrate. A different group of bacteria, which only grows where there is little or no oxygen, turns nitrate into nitrogen gas. Seachem says most tanks only have room for these bacteria deep in the substrate and inside porous rock, which is not enough on its own. To make a real difference, add media built to house them:
- Seachem De*Nitrate: Seachem's most effective media for nitrate. It needs slow flow, 50 US gallons per hour or less, or it acts as ordinary aerobic bio media. Seachem suggests a flow-through ("dummy") canister, a restricted canister, a sump or a box filter with a restricted intake. Bring very high nitrate below 20 mg/L with water changes first. Seachem says nitrate should then fall over several days and level off at about 4–5 mg/L, and that each 500 mL treats about 25–50 US gallons depending on starting nitrate and bioload.
- Seachem Tidal Matrix: pre-measured Seachem Matrix biomedia sized for Tidal power filters. Seachem says Matrix works at any flow rate and grows nitrifying bacteria on the outside and denitrifying bacteria inside each piece. It removes less nitrate than De*Nitrate, works best in larger volumes, and usually shows improvement in a couple of weeks.
- Seachem Pond Matrix: larger pieces with more internal space for anaerobic bacteria. Seachem says it removes nitrate better than Matrix and is most effective in large canister filters, though you need more of it for ammonia and nitrite.
Seachem recommends ordering filter media so water passes mechanical media first, then chemical media (like Purigen), then biological media. Prefiltering with a sponge or floss keeps porous media from clogging. Neither De*Nitrate nor Matrix wears out, so you never need to replace them. Browse all options in filter media or read choosing filter media.
Step 5: In planted tanks, let the plants use it
Live plants remove nitrate as they grow, but Seachem stresses they are not a replacement for water changes. If nitrate keeps rising in a planted tank, Seachem's advice is to ask why the plants aren't using it. Usually they are missing light, carbon or another nutrient. Seachem lists a good LED light, a carbon source such as Seachem Flourish Excel (liquid carbon, an alternative or supplement to CO2 injection) or CO2, and a full range of nutrients. Seachem also warns that denitrifying media can work too well in planted tanks and starve the plants. See how to fertilize a planted aquarium and our live plants & plant care collection.
What you need: quick checklist
| Job | Product |
|---|---|
| Measure nitrate (and nitrite) | Seachem MultiTest: Nitrite & Nitrate or Fritz Nitrate Test Kit |
| Condition water-change water | Seachem Prime |
| Remove organic waste before it becomes nitrate | Seachem Purigen |
| Remove nitrate in a slow-flow filter | Seachem De*Nitrate |
| Bio media that also removes some nitrate | Seachem Tidal Matrix or Seachem Pond Matrix |
| Help plants use nitrate | Seachem Flourish Excel |
FAQ
What is the fastest way to lower nitrates in a fish tank?
A partial water change with low-nitrate, conditioned water. It works immediately. Media and plants take days to weeks and are for keeping nitrate down afterward.
Why are my nitrates high right after a water change?
Test your tap water. If the new water already contains nitrate, changing water can't take the tank below that level.
I'm using Purigen or Matrix, so why is my nitrate still high?
Seachem says Purigen prevents nitrate rather than removing it, and Matrix lowers nitrate only as fast as its capacity allows. If nitrate holds steady, the tank is still making it faster than it is removed. Do a water change, add more Matrix, or add De*Nitrate at low flow.
Does Seachem Prime lower nitrate?
No. Seachem says Prime binds nitrate so it is less toxic for up to 48 hours, but the nitrate stays in the tank until it's removed.
Keeping a reef tank? See how to lower nitrate in a reef tank. Seeing ammonia too? Read how to lower ammonia in a fish tank. Shop test kits.